DTF Transfer | Ready to Press

Application Instructions:

Set Temperature, Time and Presure
-Use Heavy Pressure for All Fabrics
-Cotton 315 f / 15 Seconds
-Polyester/Tri-Blends 275 f / 10 Seconds
-50/50 300 f / 12 Seconds

Pre-Press 5 Seconds
-Pre-Pressing Removes any wrinkles from your fabric and aslo helps remove any moisture from the garment.

Place your Transfer
-Place your transfer sheet on the garment and lay a sheet of teflon or parchment paper over the transfer.
then press at the desired temperature and time as shown in step 1

Peel
-Peel after 10-20 seconds (when the film has cooled slightly), by peeling from one edge slowly to the other,
in a rolling motion. Hold down the garment with your free hand for better control.

Sealing
-Lay parchment paper over design and  repress for an additional 10 seconds to cure into shirt

Disclaimers:
– We are not responsible for transfers being applied incorrectly.
– We do NOT accept returns or exchanges for our products.
– The color  may slightly vary from the photo, based on your screen’s optimization settings.
– All items are made to order. Please expect a 3-5 day processing time.

Notes:
-It’s good practice to test garments before large volume production beings, every situation is custom
-If your transfer is not peeling properly, repress for 5 seconds and try peeling from a different corner
-Settings may vary for different garments and presses

I do NOT own the rights to any characters or graphics in this image.